输送带的搬运常常被忽视。传送带必须小心搬运。很多人把传送带从车里扔出来，这可能会对传送带的侧面或表面造成损坏。
Conveyor belt handling is often neglected. The conveyor belt must be handled carefully. Many people throw the conveyor belt out of the car, which may cause damage to the side or surface of the conveyor belt.
卸料过程中输送带应尽量保证平稳着陆，不要使一端接触地面。卸料时不要让卡车滚动，滚动的输送带会使其结构松散，难以清理。卸车的佳方式是用叉车将传送带固定在叉车上并固定好。禁止叉车叉头与线圈接触，直接损坏线圈。
In the unloading process, the conveyor belt should try its best to ensure a smooth landing and not make one end touch the ground. Don't let the truck roll when unloading. Rolling conveyor belt will make its structure loose and difficult to clean. The best way to unload the truck is to fix the conveyor belt on the forklift truck and fix it well. Forklift forklift forklift head is prohibited from contacting with coil and directly damaging coil.
暴力搬运必须杜绝，手工搬运不是好的方式。移动传送带的好方法是使用起重机，这样可以平稳地抬起传送带。在此过程中，钢丝绳不应损坏输送带的边缘。必须注意操作过程的平稳，只有平稳才能对输送带起到保护作用。暴力处理是不可取的，以暴力处理换取的不是效率，而是更大的损失。
Violent handling must be eliminated, manual handling is not the best way. The best way to move the conveyor belt is to use a crane, which can lift the conveyor belt smoothly. In this process, the wire rope should not damage the edge of the conveyor belt. We must pay attention to the smooth operation process. Only the smooth operation can protect the conveyor belt. It is not advisable to deal with violence. It is not efficiency but greater loss that is exchanged for by dealing with violence.
许多行业都采用输送带，高效便捷的优势是物料的短距离运输。在此，我们讨论了输送带的连接方法。一般输送带连接方式有机械连接、热硫化连接、冷粘合连接。
Conveyor belts are used in many industries. The advantages of high efficiency and convenience are the first choice for short-distance transportation of materials. Here, we discuss the connection method of conveyor belt. General conveyor belt connection methods include mechanical connection, hot vulcanization connection and cold bonding connection.
输送带的连接是影响输送带正常工作的重要因素。将输送带连接成环形是必要的，并且连接要非常光滑，这样才能保证物料的顺利运输。
The connection of conveyor belt is an important factor affecting the normal operation of conveyor belt. It is necessary to link the conveyor belt into a ring and the connection should be very smooth so as to ensure the smooth transportation of materials.
机械连接是利用机械上的输送带皮带扣。这种方法是常见和经济的，但它降低了传送带的寿命。热硫化连接输送带连接作为一种高效理想的方法，连接点过光滑，连接的使用寿命相对较长。但在技术上，整个运营过程更加负责，项目成本相对较高。冷粘接的方法是用胶粘剂进行粘接，这个过程效率更高，介于上述两者之间，整个粘接过程不太容易掌握。
Mechanical connection is the use of conveyor belt buckles on machinery. This method is the most common and economical, but it reduces the life of the conveyor belt. As an efficient and ideal method, hot vulcanization connection of conveyor belt has smooth connection points and relatively long service life. But technically, the whole operation process is more responsible and the project cost is relatively high. The method of cold bonding is to use adhesives to bond. This process is more efficient, between the two, and the whole bonding process is not easy to grasp.
